Loading...

Ultra Tile ProFlex SP+ES Standard Set Wall & Floor Adhesive S1 - White

Ultra Tile ProFlex SP+ES Standard Set Wall & Floor Adhesive S1 - White

View larger image

Ultra Tile ProFlex SP+ES is a single part, standard set, flexible adhesive for wall and floor tiles. It is specially formulated with extended workability and large format and intricate porcelain, ceramic and natural stone tile work, with exceptional adhesion and flexural capacity, that is ideal for situations where vibration may occur.

Price: £11.95 ex VAT.  (£14.34 inc VAT)

List price: £20.79   You save: (43%)

In stock

Our quantity discounts:

Quantity  8+   25+ 
Price  £10.95   £10.45 

Ultra Tile ProFlex SP+ES is a single part, standard set, flexible adhesive for wall and floor tiles. It is specially formulated with extended workability and large format and intricate porcelain, ceramic and natural stone tile work, with exceptional adhesion and flexural capacity, that is ideal for situations where vibration may occur.

  • Porcelain & sealed
  • Natural Stone Tiles
  • Extended open time
  • Swimming Pools
  • Underfloor Heating
  • Floor & Wall
  • Internal & External
  • Frost-resistant

 

A polymer modified adhesive for increased bond strength and enhanced performance. The adhesives unique qualities make it ideal for fixing tiles to most common building substrates including sand/cement render, screeds, brick and block work, heated subfloors, existing tiled surfaces and overboarded wooden floors (for substrates with greater movement or vibration refer to Ultra Tile ProFlex 2part). Ultra Tile SP+ES is perfect for interior, exterior, wet and dry conditions, such as conservatories, showers, saunas and swimming pools.

Surface Preparation

The surface being adhered to must be clean, firm, dry, free of dust, dirt, oils and grease and be strong enough to support the weight of the adhesive and tiles being fixed. To encourage best adhesion to your substrate it is advisable when applying adhesive to porous surfaces that the area is primed. Ultra Tile Prime IT FP is an ideal surface primer; as it will help to prevent water penetration, and increase bond strength. On non-porous surfaces use Ultra Floor Prime IT N.

Wooden floors: When tiling onto timber flooring ensure that the boards are dry (i.e. conditioned to the environment in which they will be used), rigidly fixed, ventilated beneath and free from barriers to adhesion. All plywood should have backs and edges sealed to prevent ingress of moisture and atmospheric humidity, the face to be tiled should be sealed with Ultra Tile Prime IT FP and left to dry prior to fixing. Boards should be 18mm thick and screwed down to the joists at 300mm centres or less. In all cases the timber surface to be tiled should be adequately stable, strong and suitably rigid enough to withstand the imposing loads without deflection.

Mixing

Ultra Tile ProFlex SP+ES should be added slowly to clean water and mixed thoroughly to give a slump free easily worked mortar. Once mixed the mortar is immediately ready for use and has a pot life of approximately 2 hours at 20°C. Mix only suffi cient material to be used within the pot life, do not remix or re-wet. Approx. mixing ratio of 5.2-5.5 litres per 20kg.

Application

Apply the adhesive to a thickness of 3-20mm up to 1m2 at a time. On internal walls use a notched trowel, leaving solid ribs i.e. 3mm x 3mm at 6mm centres for mosaics, 5mm x 5mm at 10mm centres for wall tiles and 8mm x 8mm at 16mm centres for floor tiles. On floors and external areas, use the solid bed trowel method. Large studded tiles should be ‘buttered’. Bed the tiles in with a slight twisting action. Leave spaces between the tiles for grouting (approximately 1-3mm for walls and 2-20mm for floors). Clean off excess adhesive from the tile face and grout lines with a damp cloth before it sets.

Cleaning

Tools should be thoroughly cleaned in water to remove excess material immediately after use.

Grouting

Tile set may be affected by temperature and conditions, meaning, so too will the grouting start time. Check the set time before grouting. Please call Instarmac for the recommended Ultra Tile grout.

Technical Date

Packaging: 20kg bags
Standard Conformities: EN 12004 Class C2 TE S1
Bed Thickness: 3-20mm
Coverage: 3mm bed thickness you will require 4.5kg of material per m2
Pot Life: 2 hour depending upon temperature and substrate
Set Time: 16 hours dependent upon temperature and substrate
Storage: This product must be stored in unopened bags, clear of the ground in cool dry conditions and
protected from excessive drafts. If stored correctly and used within 6 months of the date shown on the bag, the activity of the reducing agent will be maintained and this product will contain, no more than 0.0002% (2ppm) soluble Chromium (VI) of the total dry weight of the cement.
Shelf Life: 6 months in above conditions. Please note: the use of this product after the end of the declared storage period may increase the risk of an allergic reaction. High temperatures and high humidity will lead to a reduced shelf life.
All tiling should follow the correct British/European standard, and incorporate movement joints as specified therein.
As with all raw materials, colour variation may occur. Please note that this does not affect the consistency or characteristics of the enclosed product.

Secured By Card Save