Loading...

Ultra Tile Level IT FX - Fibre Fortified Floor Leveller - 25kg Bags

Ultra Tile Level IT FX - Fibre Fortified Floor Leveller - 25kg Bags

View larger image

Ultra Tile Level IT FX is a single part concrete floor leveller featuring our specially formulated fibre technology. This high strength, rapid curing and drying cementitious smoothing and levelling compound provides a strong, sound and even base.

Price: £12.95 ex VAT.  (£15.54 inc VAT)

In stock

Ultra Tile Level IT FX is a single part concrete floor leveller featuring our specially formulated fibre technology. This high strength, rapid curing and drying cementitious smoothing and levelling compound provides a strong, sound and even base.

  • Polymer Modified
  • Protein Free
  • Shrinkage Compensated
  • Pumpable
  • Non Crack Formulation
  • Suitable for Under Floor Heating
  • 3mm to 75mm 
  • Open Time - 20-30 Mins
  • Set Time - 2 - 3 Hours

The formulation incorporates fibres, specially graded fillers, cements and polymers with a rapid curing profile.

It is mixed with clean cold water to give a free flowing product that can be applied from 3mm to 75mm in one application. A high inherent strength makes it ideal for preparing subfloors prior to installation of tiling materials whilst its flow characteristics give a smoothness suitable for bonding of carpets, wood flooring, vinyl and other resilient floorings in areas ranging from residential to heavy commercial projects.

Suitable substrates include concrete, sand/cement screeds, flooring grade plywood overboarding (minimum 15mm), cement faced tile backer boards, epoxy surface Damp Proof Membranes (DPM) and calcium sulphate screeds.

It is suitable for use over heated screeds where the heating has been fully commissioned (for other underfl oor heating systems please contact Instarmac for advice). All subfloors must be protected from subground moisture by the incorporation of a constructional base DPM. Check older properties, particularly pre 1970s, which may not have a base DPM and consult Instarmac for advice. Residual construction moisture should be controlled by the use of an Ultra Floor DPM. Plywood overboarded floors should be sealed on the underside and perimeters with Ultra Floor Prime IT Multi-surface Primer. Plywood absorbency differs depending on the nature of the surface veneer. Normally a diluted coat of Ultra Floor Prime IT Multi-surface Primer (3:1 with clean water) is recommended. For dense veneers of very low absorbency, apply Ultra Floor Prime IT Multi-surface Primer neat in a thin uniform coating. Allow primer coats to fully dry. Ultra Tile Level IT FX is not recommended for use in areas where hydrostatic pressure may be problematic.

COVERAGE - A 25Kg bag will cover:

  • Approximately 1m² when applied at 15mm depth
  • Approximately 3m² when applied at 5mm depth
  • Approximately 5m² when applied at a 3mm depth

 

 

PLEASE SEE THE ABOVE TAB FOR TECHNICAL DATA SHEET

Secured By Card Save