Loading...

Mapei Pulicol 2000 - Gel for Removing Adhesives & Paints - 0.75 Kg

Mapei Pulicol 2000 - Gel for Removing Adhesives & Paints

View larger image

For removing old natural and synthetic resin-based adhesives, paint and grouts/grout residue.

Price: £18.78 ex VAT.  (£22.54 inc VAT)

List price: £22.97   You save: (18%)

In stock

For removing old natural and synthetic resin-based adhesives, paint and grouts/grout residue.

Some application examples

  • Removing old adhesive from floors e. g. marble, ceramic tile, wood, concrete, cementitious levelling coats, metal, etc.
  • Removing old adhesive from ceramic tiles and mosaic, marble, concrete, wood, gypsum, metal, fibrous concrete, etc. 
  • Removing paint from the surface of metal, wood, concrete, etc.
  • Removing epoxy grouts and their residue from the surface of tiling and other substrates

Tecnical Characteristics

Pulicol 2000 is made from a mixture of unchlorinated solvents in gel form. It is easy to apply with a spatula or by brush and gives off very little odour. Since there is no methylene chloride in the composition, the product complies with EU regulation N° 276/2010 issued by the European Parliament and the European Council regulation of the 6th of May 2009 concerning restrictions on the marketing and use of methylene chloride.

Pulicol 2000 has high detachment capacity on films of resin-based adhesives and varnishes within just a few minutes of application.

Recommendations

  • Do not mix Pulicol 2000 with water.
  • Do not use on substrates that can be damaged by solvents, e.g. certain plastics (rubber, PVC), surfaces treated with decorative enamel that are not resistant to solvents, or on varnished wood floors.
  • Do not use Pulicol 2000 on baking paint because it would have little effect.

Application Procedure

Spread Pulicol 2000 with a trowel or brush on the residues of adhesive or varnish which need to be removed. Wait 2-3 minutes, depending on the type of adhesive or varnish, and remove the Pulicol 2000 together with the adhesive or varnish with a smooth trowel or high-pressure hydro-cleaning unit.

If the surface is smooth with low absorbency e.g. marble or ceramic, rinse off with plenty of water.

If the surface is smooth and non-absorbent, e.g. marble or ceramic tile, wash it with a solution of caustic soda and rinse thoroughly with water. If the surface is rough and/or absorbent, e.g. cementitious screeds or scratch coats, remove the residue with sandpaper or a wire brush. Do not wash wood surfaces, sandpaper them only. 

Secured By Card Save