Loading...

LTP Wall & Floor Grout Protector - Colourless Joint Sealer - 1 Litre

LTP Wall & Floor Grout Protector - Clear, Colourless Joint Sealer - 1 Litre

View larger image

Suitable for kitchen and bathroom walls and floors:protects against water,dirt,grease,mould and limescale. Forms a clear, colourless barrier. Helps protect absorbent, porous grout joints.

Price: £12.61 ex VAT.  (£15.13 inc VAT)

List price: £15.81   You save: (20%)

In stock

Clear,Colourless,Porous Grout Joint Sealer. For interior and exterior use.

Suitable for kitchen and bathroom walls and floors:protects against water,dirt,grease,mould and limescale. Forms a clear, colourless barrier. Helps protect absorbent, porous grout joints.

Directions for use Important:

LTP Wall and Floor Grout Protector is intended for use only on porous grout joints between non-porous glazed or highly vitrified ceramic tiles (not epoxy grout). Ensure that the grout surface to be treated is completely clean and dry. Allow grout to dry for 24 hours after cleaning. Apply a generous coat of LTP Grout Protector using a small paintbrush and allow to soak in. To avoid leaving a film on the adjoining tiles, wipe away any surplus as you go with a clean, fluff-free cloth, dampened, if necessary, with a little white spirit. Do not treat more than an area of 2 or 3 square metres at a time to ensure that all of the product is absorbed into the grout. Remove any excess LTP Grout Protector which is not absorbed into grout joints within 20 minutes of application. Repeat process after one hour. If necessary, further treatments can be applied after an hour or so. After 48 hours the surface can be cleaned as normal. Use a dry cloth to wipe away any excess from non-absorbent surfaces. . Use only in well ventilated areas.

Coverage

Up to 500 linear metres per 1 litre

Maintenance

If necessary, wipe over grout joints using a mild detergent. Use LTP Grimex to remove stubborn surface marks, in which case you may need to re-seal treated areas.

Notes

Please Note: Protect glass, sanitary ware, polished surfaces, plastics, painted and other sensitive surfaces against splashes. Do not allow excess to dry on the surface. Wipe away carefully. If in doubt, test the product on a small area. Do not use in direct sunlight or in temperatures over 25 degrees C. Drying Time: Approx 30-40 minutes. Becomes fully effective after approx 48 hours.

Storage information

Store in a cool, dry, frost free environment. Shelf Life – Up to 4 years for un-opened containers.

Health & Safety

Contains: White Spirit (naptha petroleum, hydrodesulphurised heavy (<0.1% benzene). Flammable liquid and vapour. May be fatal if swallowed and enters airways. Toxic to aquatic life with long lasting effects. Keep out of the reach of children. Store locked up. Avoid release to the environment .Keep away from open flames-No smoking. Wear protective gloves. IF SWALLOWED: Rinse mouth. Do NOT induce vomiting. Get medical advice/attention. Dispose of contents/container to hazardous waste collection point.

Secured By Card Save