Loading...

LTP Stoneseal 250ml Aerosol - Lasting Protection Against all Dirt

LTP Stoneseal 250ml Aerosol - Lasting protection against all types of dirt

View larger image

Forms a colourless barrier and helps to protect porous stone surfaces from water, dirt, oil, grease, soot and lime scale, making treated surfaces easier to keep clean. Protection for polished and unpolished natural and artificial stone including limestone, marble, travertine, slate, sandstone, quartz, terrazzo, basalt, concrete and all other types of masonry surface.

Price: £8.06 ex VAT.  (£9.67 inc VAT)

List price: £9.22   You save: (13%)

In stock

Our quantity discounts:

Quantity  2+   3+ 
Price  £7.61   £7.16 

Forms a colourless barrier and helps to protect porous stone surfaces from water, dirt, oil, grease, soot and lime scale, making treated surfaces easier to keep clean.
Protection for polished and unpolished natural and artificial stone including limestone, marble, travertine, slate, sandstone, quartz, terrazzo, basalt, concrete and all other types of masonry surface.

- Ideal for stone fireplaces and worktops
- Easy to apply, quick drying spray-on formula
- Long lasting protection against all types of dirt and grease
- Suitable for polished and unpolished stone
- Internal and external use

DIRECTIONS FOR USE
Always use a mask. Use in well ventilated areas.

Preparation:
Areas to be treated must be cleaned. Older contaminated and dirty stone surfaces should be cleaned with LTP Stone Foam Intensive Cleaner and then rinsed thoroughly. Newly installed surfaces should be clean and free from dust before application.

Rough Cut, tumbled, textured or riven surfaces:
Shake can well. Hold can 15-20 cm from the surface and spray in a sweeping motion. Touch dry within 5 minutes. Test area 30 minutes after application with a little water, if the water is absorbed, a second or even third coat may be required to obtain maximum performance. A 2-3 hour curing time is recommended upon completion before allowing traffic.

Honed, smooth and polished surfaces:
Shake can well. Hold can 15 -20 cm from the surface and spray in a sweeping motion. Leave for up to 5 minutes and then remove visible excess with an absorbent cloth. Finish after removal of excess by buffing with soft lint free cloth or machine with buffing pad.
Do not allow residues to dry on the surface.
Shake can well before use.

Coverage:
5 - 10 m² depending upon the porosity and the number of coats required.

Secured By Card Save