Loading...

Pure Adhesion Ltd remains open and we continue to process online orders as normal. Due to increased mail order volumes please allow 1-2 working days for delivery (excluding weekends). As a precaution, our trade counter remains temporarily closed, but telephone orders can be collected. Thank you for your support.

LTP Stoneclean 250ml Aerosol - Ideal for Stone Fireplaces & Worktops

LTP Stoneclean 250ml Aerosol - Ideal for stone fireplaces and worktops

View larger image

LTP Stoneclean deep cleans surfaces to remove all types of dirt and grease. Ideal for removing build up of wax and aftercare product.

Price: £7.93 ex VAT.  £9.52 inc VAT

List price: £8.19   You save: (3%)

In stock

Our quantity discounts:

Quantity  2+   3+ 
Price  £7.16   £6.76 


LTP StoneClean cleaner deep cleans surfaces to remove all types of dirt and grease. Ideal for removing build up of wax and aftercare product.

- Ideal for stone fireplaces and worktops.
- Easy to apply, fast acting formula.
- Removes all types of dirt and grease.
- Suitable for polished and unpolished stone.
- Internal and external usee for internal and external use.

LTP Stoneclean cleaner deep cleans surfaces to remove all types of dirt and grease. Ideal for removing build up of wax and aftercare product. Use as an intensive cleaner for conditioning new surfaces before sealing or as an intensive cleaner for renovating existing surfaces.
Suitable for polished and unpolished natural and artificial stone including limestone, granite, marble, travertine, slate, sandstone, quartz, terrazzo, basalt, concrete and all other types of masonry surface.

DIRECTION FOR USE

Preparation:
Areas to be treated must be free from dust before application. Mask and protect surfaces that are not to be treated.

Honed, Smooth, Polished, Rough Cut, tumbled, textured or riven surfaces:
Shake well. Hold can 15-20 cm from the surface and spray in a sweeping motion. Allow the foam to dissolve. This will take 5 – 10 minutes. Add a little water and agitate with a white emulsifying pad or similar mild abrasive pad, cloth or brush to help release the ground in dirt and grime. Rinse well with plenty of water and a sponge making sure to change rinsing water regularly.
On extremely dirty surfaces this process may need to be repeated.

Coverage:
5 - 10 m² depending upon the porosity and the number of coats required.

Notes:
Do not spray on to painted, acrylic or stained surfaces such as cabinets and stained timber skirting boards. Mask and protect these surfaces before application. Use only in open or well ventilated areas. It is recommended that a suitable respiratory mask be worn at all times. Overspray on some surfaces, may in some cases cause damage; in which case wipe up and rinse immediately with clean water. Always test the product on an inconspicuous area for suitability before general application.
Shake can well before use.

Shake can well before use.

 

 

 

Secured By Card Save
Secured By Card Save