Reduced to Clear

LTP External Stone Sealer - Water Based Impregnating Sealer - 1 Litre - LAST FEW REMAINING

Moisture-repellent and stain resistant. Delicately enhances appearance. Helps prevent moss and mould formation. Protects against weathering and efflorescence. UV Resistant and non-yellowing.
13993

Additional Products (Optional)

£18.60 inc.VAT (£15.50 ex.VAT)
cart-icon
Adding to cart… The item has been added
Available: In Stock (5)

Environmentally friendly water based impregnating sealer.

Moisture-repellent and stain resistant. Delicately enhances appearance. Helps prevent moss and mould formation.
Protects against weathering and efflorescence. UV Resistant and non-yellowing. 
Suitable for use on all types of external masonry including natural and artificial stone, limestone, sandstone, slate, brick and concrete paving.

Directions for use

Preparation:
Ensure surface to be treated is as clean and as dry as possible.
If necessary, first wash surfaces down with a dilute solution of LTP Grimex (1:10).
Rinse well and leave overnight to dry.  Scrub well using a white pad. 

Sealing:
Shake bottle well before use. Apply evenly to the surface using a foam roller or paint brush.
On more absorbent surfaces apply further coats at hourly intervals until the surface is completely saturated.
Remove any residual sealer if still visible after one hour.

Coverage:
Lower porosity surfaces; 1 Litre = 15m2
Lower porosity surfaces; 5 Litre = 75m2

Higher porosity surfaces; 1 Litre = 7.5m2
Higher porosity surfaces; 5 Litre = 37.5m2

Aftercare:
Routinely sweep surfaces to keep them free from organic matter.
Surfaces can be washed on a regular basis with LTP Waxwash.

Other:
Dried on over applied sealer can be removed by buffing with a micro-fibre cloth.
If dried on residues are left too long and difficult to buff away:apply a little soapy water and gently scrub
with a white emulsifying pad, rinse and leave to dry.

On higher porosity surfaces sufficient sealer should be applied until treated surfaces are fully saturated.
Do not use in temperatures under 5°C or over 25°C.
Clean application tools and brushes with water after use.

Storage information:
Store in a cool, dry, frost-free environment.
Shelf Life – Up to 2 years for un-opened containers.

Health, Safety & Environmental:
HARMFUL IF INHALED. HARMFUL TO AQUATIC LIFE WITH LONG LASTING EFFECTS.

Keep out of reach of children. Do not breathe fumes/vapours/spray.
Use only outdoors or in a well ventilated area.
Avoid release into the environment.
IF INHALED: Remove person to fresh air and keep comfortable for breathing.
Call a POISON CENTRE/doctor if you feel unwell.
Dispose of contents/container to hazardous or special waste collection point.