Loading...

Lithofin Resin-EX - Special Stripper Gel - 1 Litre

Lithofin Resin-EX - Special Stripper Gel - 1 Litre

View larger image

This special remover is based on acidic reaction compounds supported by select, highly active organic solvents. In many cases Lithofin Resin-EX can be used instead of (dangerous and environmentally harmful) CFC-based cleaning products.

Price: £29.94 ex VAT.  (£35.93 inc VAT)

List price: £37.63   You save: (20%)

In stock

Our quantity discounts:

Quantity  2+ 
Price  £27.74 

This special remover is based on acidic reaction compounds supported by select, highly active organic solvents. 
In many cases Lithofin Resin-EX can be used instead of (dangerous and environmentally harmful) CFC-based cleaning products. 

FIELD OF USE

To remove epoxy grout materials and residues.
ALso highly suitable for removing organic substances such as resins, sealants, coatings, oil and grease deposits
paint (grafitti), lacquer, adhesives, plastic residues, etc.
Suitable for indoor and outdoor use.

Surfaces: 
All quarry and ceramic tiles, rough and natural stones such as granite, gneiss, quartzite as well as concrete
and concrete stone.

Surfaces: 
NOT Suitable for Polished or Honed calcareous stone (e.g. marble. limestone, concrete stone, etc)

DIRECTIONS FOR USE

Test the product prior to use.
ALways aplly to a dry surface. Protect the surface from wetness during working time, because water represses the effectiveness.
Application / Surface Temperature: 10 - 30 Celcius
The mentioned working times are shorter at higher temperatures and longer in colder temperatures.

DIRECTIONS TO REMOVE PAVEMENT FIXING MORTAR

Generously apply to the dry surface using a brush or a scrubber.
Allow to work for up to approx. 20-30 min. at room temp. of about 20°C. 
Then add water (best if diluted 1:10 with Lithofin MN Power-Clean) and brush. 
Afterwards, rinse and brush. Always brush diagonally to grouts. Rinse surface again with water.
In case of any leftovers, repeat when surface is dry

Coverage: up to approx. 5 m²/L, depending on dirt.

DIRECTIONS TO REMOVE EPOXY RESIN (2K) MORTAR

Generously apply to the dry surface using a brush o a roller. Allow to work for approx. 3 hrs at about 20°C
Then use a rough pad (ex. green pad for glazed tiles) to work through. Add water and continue to scrub.
Remove excess fluid and rinse with water immediately.

Coverage: up to approx. 20 m²/L on glazed tiles. 

Storage: Cool and closed, shelf life of up to 2 years

For more information see Technical & Safety Data Sheets.

Secured By Card Save