Loading...

Lithofin MN Slate Seal High Gloss Sealer - 5 Litre

Lithofin MN Slate Seal High Gloss Sealer - 5 Litre

View larger image

For rough and honed slate surfaces. Forms a shiny and protective layer, strengthens the colour structure and simplifies maintenance. Lithofin MN Slate Seal is a ready to use, indoor sealer, contains solvents, ok to apply multiple coats for extra shine. Also available in 1 Litre

Price: £73.21 ex VAT.  (£87.85 inc VAT)

List price: £91.74   You save: (20%)

In stock

Our quantity discounts:

Quantity  2+   3+ 
Price  £71.42   £68.99 

A solvent based acrylate sealant that produces a high sheen finish, whilst intensifying and protecting the colours and aids maintenance on riven / rough multi-coloured slate.

Description: 
A special product from the LITHOFIN-Range for marble, natural and engineered stone (MN). This ready-to-use sealant contains high quality acrylate.

Properties:
Lithofin MN Slate-Seal forms a high gloss film on the surface which closes the pores of the stone. 
This treatment prevents water and dirt from penetrating into the surface, making it easier to maintain. 
The permeability of the stone is greatly reduced. 
Product is suitable for indoor use only and is not recommended for worktops or bathrooms/wetrooms
The colour structure of the stone is intensified; the surface develops a “wet look”.  

Surfaces: 
Nearly all absorbent, porous natural stones (e.g. granite, gneiss, marble, limestone, slate, etc.) and engineered stones.

Field of use:
For glossy sealing of rough and honed natural and concrete, stone surfaces. Embellishes the appearance and facilitates maintenance.

Directions for Use:
The surface to be treated must be completely dry and clean.
Always try the product in an inconspicuous area prior to use.
In the case of highly absorbent surfaces, it may be necessary to apply a second thin coat.
Evenly apply Lithofin MN Slate-Seal with a clean foam roller or brush.  

Application Temperature: 
The temperature of the surface should be between 5°C and 25°C. Switch off under floor heating. 

Drying time:
Safe to walk on after approx. 45 minutes, completely dry after 24 hours. 

Please Note:
Non-absorbent, polished or very finely honed surfaces can not be sealed. 
Moisture inside the stone will cause the sealant to turn white.
Please ensure that no moisture can penetrate into the sealed surface, and that moisture can not be transported through the surface from the ground.
Lithofin MN Slate-Seal can be removed from the surface with Lithofin WAX-OFF. 
Tools can be cleaned with Lithofin WAXOFF. 
Glass, wood, varnish, plastics and other surfaces sensitive to solvents must be protected against splashes

Durability: 
With correct maintenance and depending on the level of wear and tear up to several years.

Directions for use: 
In the case of highly absorbent surfaces, it may be necessary to apply a second thin coat.
Evenly apply Lithofin MN Slate-Seal with a clean foam roller or brush. 
Always try the product in an inconspicuous area prior to use.
The surface to be treated must be completely dry and clean.

Coverage: 
Approx. 20m²/litre on honed concrete stone 
Approx. 12m²/litre on sawn granite
Approx. 10m²/litre on rough limestone

Storage: 
Keep closed, cool and dry. Shelf life of up to 5 years. Open containers should be used quickly.

Environmental Protection:
Contains solvents, free of chlorinated hydrocarbons.

Disposal: liquid product is classified as special waste.
Clean containers can be recycled through collection systems. 
Containers are made of environmentally friendly tin plate. 

all cases of doubt, test the product first in an inconspicuous area.

Secured By Card Save