on sale

Lithofin MN Colour Intensifier Stone Colour Enhancing Sealer - 1 Litre

Improves the appearance of absorbent natural & artificial stone surfaces with rough, honed or flamed finishes. Invigorates the colours and enhances the structure without creating any gloss
14154, 13880, 13993, 15590,

Additional Products (Optional)

List Price: £31.64 inc.VAT
£23.29 inc.VAT (£19.41 ex.VAT)
(You save £8.35 )
cart-icon
Adding to cart… The item has been added
Available: In Stock (21)
  • Downloads

Improves the appearance of absorbent natural and artificial stone surfaces with rough, honed or flamed finishes. Invigorates the colours and enhances the structure without creating any gloss; makes surfaces water repellent and facilitates easy maintenance.

For full oil, water and grease repellence the product can be used prior to treatment with an appropriate impregnating sealant such as Lithofin MN Stain Stop.

Suitable for indoor and outdoor use. 

Description:
A special product from the Lithofin range for marble, natural and artificial stone. It is a silicone based, ready-to-use impregnator, with special colour intensive additives which are soluble in an organic solvent. Lithofin MN Colour Intensifier penetrates the surface. It is a water repellent and intensifies the colour. The water repellent effect reduces the tendency to collect dirt and makes maintenance easier. Water vapour permeability is retained, so that no surface film is formed.

Field of application and suitable surfaces:
Particularly suitable for colour enhancement on walls and floors, steps, house floors, terraces etc. which appear colourless, or have to adapt in colour to a polished surface. Lithofin MN Colour Intensifier is suitable for porous, absorbent natural stone with rough, flamed surfaces such as granite, gneiss, porphyre, bricks, slates, sandstone slabs, natural stone like terrazzo and concrete etc. This product can be used for both indoor and outdoor applications. If the flooring or walling application requires a grease repellent Lithofin MN Colour Intensifier can be applied prior to Lithofin MN Stain-Stop. Lithofin MN Stain-Stop can be applied between 3 - 4 hours after Lithofin MN Colour Intensifier.

Please note:
Glass, polished surfaces, plastics etc. must be protected against splashes. Do not apply in direct sunlight or in a temperature exceeding 25 degrees celcius. The application tools can be cleaned using thinner or white spirit.

Durability:
inside the effect is practically unlimited with correct care. Outside, the colour enhancement effect remains for several years according to the surface and weather. The protective effect is retained for 5 - 7 years.

Directions for use:
The surface should be absorbent, clean and dry. It is not suitable for highly polished surfaces. If in doubt, apply to test areas. Apply Lithofin MN Colour Intensifier thinly and uniformly with a roller or brush or builder's sponge. In the case of strongly absorbent surfaces, repeat process twice. On less absorbent surfaces where gloss is formed, remove any residue with a cloth.

Coverage:
about 5 - 10 sq./m, per litre depending on surface porosity.

Drying time:
About 30 - 40 minutes.

Storage:
Keep cool and dry

Shelf Life:
Shelf life of up to 4 years. Open containers should be used quick