Loading...

Kerakoll BioGel REVOLUTION Rapid Set S1 Flexible Adhesive - Grey 25kg Bags

Kerakoll BioGel REVOLUTION Rapid Set S1 Flexible Adhesive - Grey 25kg Bags

View larger image

A Multi-purpose flexible structural gel adhesive. longer work ability with accelerated adhesion for bonding even in extreme conditions of all types of material, on any substrate for any use. Eco-friendly. Ideal for use in green building.

Price: £19.92 ex VAT.  (£23.9 inc VAT)

List price: £21.91   You save: (9%)

In stock

A Multi-purpose flexible structural gel adhesive. longer work ability with accelerated adhesion for bonding even in extreme conditions of all types of material, on any substrate for any use. Eco-friendly. Ideal for use in green building.

  • Doesn't Cause Irritation - The number 1 gel adhesive without a warning label
  • Non Thickening - Up to 1 hour of constant workability
  • Accelerated Adhesion - Total safety after only 3 hours

FEATURES AND ADVANTAGES

  • THIXOTROPIC AND FLUID
  • LONG OPEN TIME
  • SHAPE MEMORY
  • NON-SLIP
  • WATER RESISTANT
  • HIGH AND LOW THICKNESS
  • FULL WETTABILITY
  • NO SHRINKAGE
  • FROST RISK
  • REDUCED ABSORBS
  • DYNAMIC LOADS
  • DISTRIBUTES TENSILE STRENGTH
  • INCREASES THE PERFORMANCE

Greenbuilding Rating Category:

  • Inorganic mineral products
  • Laying ceramic tiles and natural stone
  • Rating: Eco 3

The GreenBuilding Rating® is a dependable and reliable evaluation method for measuring and improving the environmental performance of building materials.

Eco Notes

Formulated with locally-sourced minerals meaning lower greenhouse gas emission during transportation Contains recycled minerals thereby reducing the damage to the environment caused by extracting pure raw materials Single-component; avoiding the use of plastic cans reduces CO2 emissions and the need to dispose of special waste

The combination of substrates, materials and uses indicated may not always be possible to achieve. It is essential that you consult the individual product technical sheets to check their suitability. Anything that is not foreseen in this list must be requested directly from Kerakoll Global Service.

Substrates - Revolution

existing tiles waterproofing products heating systems cement-based screeds concrete plasterboard fibro-cement slabs gypsum and anhydrite cellular concrete brick lime and cement-based plasters/renders thermal insulation panelling systems insulating panels impact noise insulation sheets timber metal pvc

 Materials - Revolution

porcelain tiles laminated stoneware low thickness slabs ceramic tiles large formats 300x150 cm slabs marble - natural stone recomposed materials glass mosaics glass tiles thermal and acoustic insulation terracotta - klinker

Uses - Revolution

adhesive and finishing floors and walls for internal use - external overlaying terraces and balconies facades swimming pools and fountains saunas and spa domestic commercial industrial street furniture

PREPARATION OF THE SUBSTRATE

All substrates must be level, cured, undamaged, compact, rigid, resistant, dry and free from any debonding agents and from damp rising (x UK) - All surfaces must be leveled, cured, undamaged, compact, rigid, resistant, dry and free from any loose particles and damp rising (x INDIA). It is good practice to dampen highly absorbent concrete substrates or apply a coat of Primer A Eco.

ADHESIVE PREPARATION

  • Mixing water (EN 1348) Grey ≈ 23% - 25% by weight
  • Mixing water on-site For low thickness laying and full wettability: Grey ≈ 6,2 ℓ / 1 bag
  • on walls, for high and low thickness laying: Grey ≈ 5 ℓ / 1 bag

The amount of water to be added, indicated on the packaging, is an approximate guide. It is possible to obtain mixtures with consistency of variable thixotropy according to the application to be made. 

APPLICATION

To guarantee structural adhesion it is necessary to apply a layer of adhesive sufficient to cover the entire back of the coating material. Large, rectangular sizes with sides > 60 cm and low thickness sheets may require adhesive to be applied directly to the back of the material. Check samples to make sure the adhesive has been transferred to the back of the material. Create elastic expansion joints: - ≈ 10 m2 in external applications, - ≈ 25 m2 in internal applications, - every 8 metres in long, narrow applications. Respect all structural, fractionizing and perimeter joints present in the substrates.

Secured By Card Save