Genesis Aluminium Straight Edge Trim - 10mm Depth x 2.5m - GRANITE - ESA100.411

Pure Adhesion Ltd remains open and we continue to process online orders as normal (next weekday delivery for orders placed before 12.00 hrs midday). Our trade counter is also open for collections, and we ask customers to observe our social distancing measures. Thank you for your support.

Genesis Aluminium Straight Edge Trim - 10mm Depth x 2.5m - GRANITE - ESA100.411

View larger image

FREE DELIVERY*

Supplied in 2.5m lengths

Most of the Genesis metal trims come with protective plastic film to prevent scratches whilst grouting

An L shaped extruded aluminium profile designed to protect the edges of ceramic tiles or similar hard finishes fitted in wall or floor installations.

* Unfortunately we are unable to offer a delivery service for Highlands, Offshore Islands, Northern Ireland or Channel Islands at this time.

Price: £27.50 ex VAT. £33 inc VAT

In stock

Quantity:

Our quantity discounts:

Quantity	2+	3+	4+	5+	6+	7+	8+	9+	10+	20+
Price	£18.75	£15.83	£14.38	£13.50	£12.92	£12.50	£12.19	£11.94	£11.75	£10.88

Description
Features
Data Sheets

A comprehensive range of profiles designed to protect corners avoiding the unsightly and fragile 45 degree cut. The defined square edge clearly outlines coverings such as rectified porcelain stoneware. Available in different materials, colours and finishes, these profiles offer a practical and aesthetic solution, ideal for walls and floors.

Where appropriate, trims are supplied with transparent protective film offering added protection during transport, storage and installation.

Select ESA according to tile thickness.
Trowel tile adhesive over the area that forms the perimeter of the tiled covering.
Press the perforated anchoring leg of the ESA into the tile adhesive and align, mechanical fix if required. Trowel additional adhesive over the perforated anchoring leg to ensure full coverage.
Solidly embed the tiles so that the tiled surface is flush with the top of the profile, the profile should not be higher than the tiled surface, but rather up to approximately 1 mm lower.
Fill the joint completely with grout.