Loading...

EcoProTec - Blackstone Sealer & Restorer (Water Based) - 5 Litre

View larger image

For restoring the appearance of all types of faded dark natural and artificial stone including limestone, marble, slate and concrete pavers. This product is a permanent staining solution that will darken the surface of the stone and the grout joints making it very difficult to remove once applied.

Price: £121.62 ex VAT.  (£145.94 inc VAT)

List price: £133.01   You save: (9%)

In stock

For Exterior use

For restoring the appearance of all types of faded dark natural and artificial stone including limestone, marble, slate and concrete pavers.

This product is a permanent staining solution that will darken the surface of the stone and the grout joints making it very difficult to remove once applied.

Test on an inconspicuous area before general application and do not walk on treated surfaces until the solution has completely dried.

  • Up to 30m2 per litre per coat.
  • Exterior use
  • Easy to apply
  • Low odour
  • VOC free
  • High performance
  • Non hazardous

DIRECTIONS FOR USE

Wear gloves and ensure that any surfaces not to be treated are covered and protected.

IMPORTANT: This product is a permanent staining solution that  will darken the surface of the stone and the
grout joints making it very difficult to remove once applied.
Test on an inconspicuous area before general application and do not walk on treated surfaces until
the solution has completely dried.

Shake bottle well before use.
Apply a small amount to the Surface and spread out evenly using a soft cloth or sealant applicator.
For rough cut or textured surfaces apply with foam roller or paint brush.
Apply further coats (max 3) at 2 hourly intervals until desired depth of colour has been achieved.
Leave to dry naturally.
Honed and smooth surfaces: once dry and to ensure even application if may be necessary to work off any excess sealer
using a soft cloth.
Do not walk on the surface for at least 4 hours after final application.
Allow newly treated surfaces to cure for 24 hours and then rinse with Ecoprotec Aftercare Cleaner,
this will help cut back any excess sealer.
Before allowing traffic gently rub the surface in a few areas with white cloth or paper towel to make sure that it is colourfast.
Always experiment on a trial area first to establish optimum results.

COVERAGE: Up to 30 sq.m per litre per coat.

STORAGE INFORMATION: Up to 2 years for un-opened containers. Store in a cool, dry, frost-free environment.

Secured By Card Save