Mira Liquid acryl based material for priming of all porous and absorptive substrates made of concrete, plaster board, plaster based on anhydrite or cement. Joint-less membrane for water isolation of walls and floors
Waterproofing of "wet-zones"
The diagrams illustrate the extent of the "wet-zone" and the "damp-zone"
in a bathroom, washroom and shower area.
The recommended degree of waterproofing is based on these defined areas.
NB. In Denmark, and other countries, approved waterproofing is a legal requirement
The wall area behind the hand basin is only regarded as wet-zone if the basin is fitted with a shower
 |
Mira 4120 Sealer
Liquid, acrylic based solution with red colouring. Recommended as a primer in "dry-room" areas (diluted on porous and concentrated on wooden surfaces). Also recommended as a waterproofing coating for walls in the "damp-zone" in "wet-rooms".
Usage: Concentrated. 1 kg covers 5 - 7 sq / m
Thinned with water in ratio 1:3 (sealer : water), 1 kg covers 8 - 12 sq / m
|
 |
Mira 4400 Multicoat
Neoprene based thick liquid membrane for 100% waterproofing of all floor and wall surfaces in the "wet-zone". Applied to the surface with brush or roller. Also to be used for waterproofing of wall / floor join, corners, wall joints, apertures, etc in the "wet-room"
Usage: Floors: min. 1.5 kg / sq / m Walls: min. 1.25 kg / sq / m |
 |
Mira Safecoat / Seal Manchete
Safecoat roll / strip is used with Mira 4400 multicoat when waterproofing floors, joints, corners, etc. The seal manchetes are used similarly with Mira 4400 multicoat for sealing of pipe and drain apertures.
|
