Description
Lithofin SPLASH-STOP is a universally usable impregnator based on water-repelling siloxane compounds. The product contains sovents and has a low viscosity.

For rendering facades and other surfaces made from natural stone (e.g. sand stone, granite, limestone) and quarry tiles,engineered stone and concrete water and dirt resistant. Suitable for indoor and outdoor use.

The surface to be treated must be absorbent, clean and completely dry. Generously apply a consistent amount of Lithofin SPLASH-STOP with a brush or roller. In case of very absorbent materials, repeat the application after approx. 30 to 40 minutes. Avoid puddles, drips and foam.

Do not allow the product to dry on the surface. Immidiately distribute and remove surface residues with a cloth.

Please Note: always try the product in an inconspicuous
area prior to use.
Non absorbent and wet surfaces can not be treated. Glass, plastics and other solvent sensitive surfaces must be protected against splashes.
The surface temperature must be between 10°C and 25 °C.
Do not use in direct sunlight.

Drying Time: approx. 40 minutes

Coverage: depending on the surface.
Sandstone: approx. 1 to 4m² per litre
Quarry tiles: approx. 5 to 8m² per litre
Rough granite: approx. 10 to 15m² per litre

Storage
Keep cool, closed and dry. Shelf life of up to three years. Open containers should be used quickly.


Click Here for further information and Safety Data