Price: £15.25 ex VAT
Mira 3130 superfix (white) Flexible, water and frost resistant, cement based adhesive mortar with a better adhesiveness. Attaches to most substrate types and can withstand modest deformations. Recommended for fixing of all types of ceramic wall and floor tiles and natural stones. Suitable for thin heated floors, swimming pools as well as weak absorbing tiles and clinker with water absorption below 0,5%. Grouting on walls - after appr. 12 hours; on floor - after appr. 20-30 hours. Supplied in 15 kg. plastic strengthened paper bags. Highly elastic, thin-layer adhesive mortar for fixing of ceramic and clinker tiles, gres (stone ware), mosaic, marbles and thin, semitransparent tiles of natural stones.
Coverage: 2.5 - 3 sq / m on calibrated tiles, even application 5-6mm. Uncalibrated tiles coverage reduces to approx 1.75 sq / m.
Characteristics:
- highly elastic
- highly adhesive
- for indoor and outdoor use
- for heated substrates
- for terraces and balconies
- frost resistant
- water resistant
- easy to use
- for horizontal and vertical surfaces
- for thin, semitransparent tiles
- white cement reduces alkaline discolouring
Use mira 3130 superfix is applicable for fixing of wall and floor tiles on stable substrates made of concrete, concrete elements, light weight concrete, cast asphalt, gypsum board, anhydrite or cement based rendering, water- or electric heated substrates, painted surfaces, old tile surfaces, terrazzo, surfaces insulated with 4400 multicoat and 4120 sealer. For use on terraces and balconies. Concrete substrates are reckoned stable when approx. half of the drying shrinkage has occurred.
Substrate Preparation:
The substrate must be stable, dry, compact, cleaned of dust, grease, oil etc. Concrete slurry (if any) should be removed, weaker parts of substrate should also be removed and then repaired again. Remove dust with a vacuum cleaner. Grease, oil, dirt should be cleaned with 7110 base cleaner. Absorptive substrates should be primed with mira 4120 sealer, thinned with water, in the ratio: 1 part of 4120 sealer and 3 parts of water. Non-absorptive substrates e.g. made of ceramic tiles ect. Need not to be primed.
Technical Conditions:
a. Mixing 3130 superfix should be mixed in proportion: approx. 0,25 l of water for 1 kg of powder. Mixed 3130 superfix should be left for approx. 20 minutes, then stir well ? now it is ready-to-use. Best result gives mixing with a glue mixer.
b. Application Prepared 3130 superfix should be applied with smooth side of a trowel and spread well on the surface, then spread with the toothed side of a trowel. Tooth size depends on the tile size.
c. Temperature: Minimum air and substrate temperature +6°C
