Backer Board Mega Strength Adhesive No More Ply

No More Ply: 310mm Mega Strength Adhesive

Professional grade fast setting adhesive for multiple wetroom applications. Fast setting, waterproof, extra strong construction adhesive. Thousands of uses for the tiler, tradesman, builder and DIY enthusiast.

Recommended With
Description
Data Sheets
Features

No More Ply: 1200x600x6mm Backer Boards No More Ply is a premium tile backer board which is especially useful for overboarding timber or chipboard floorboards prior to tiling. No More Ply provides an exceptionally stable base for all tiling projects.

£7.99 ex VAT

No More Ply: 25mm Self Drilling Screws (200) Screws should be inserted with a cordless screwdriver and 8 screws per sheet is usually sufficient.

£4.99 ex VAT

No More Ply: SBR Professional Latex Tilers... An ideal board primer used prior to tiling newly laid boards. 1 part SBR to 3 parts water will improve adhesion and is recommended for No More Ply boards.

£7.85 ex VAT

No More Ply: Carbide Tip Scoring Knife The No More Ply carbide tipped scoring knife is a professional grade scoring designed for heavy duty use. The carbide blade will significantly outlast ordinary scoring blade, providing you with superior results and greater ease of use. It's ideal for scoring No More Ply tile backer boards.

£4.99 ex VAT

Silverline Caulking Gun - Max 400ml Pressed steel frame and handle with plunger and release clip. For the application of sealants and adhesives. Max capacity 400ml.

£2.95 ex VAT

Professional grade fast setting adhesive for multiple wetroom applications.

Fast setting, waterproof, extra strong construction adhesive. Thousands of uses for the tiler, tradesman, builder and DIY enthusiast.

Almost instant bonding to wood, metal, brick, stone and concrete.
Sets in 5-10 minutes to an exceptionally high-bond strength.
Waterproofs and reinforces joints.
Replaces tape for all tile backer boards
Totally waterproof even to seawater.
100's of other used

Description

No More Ply Mega Strength Polyurethane Adhesive is a transparent one part moisture curing adhesive which sets in 5 minutes. The product is supplied as a thixotopical gel which is 100% seawater proof, gives exceptional high bond strength and is resistant to most chemicals. The product foams slightly on application to fill small gaps, which increases bond strength.

Areas of Use

This product may be used internally or externally
Used to bond most types of wood (hard, soft, exotic, painted wood), Formica, Polystyrene Foam, PU Foam and Glass Wool to porous surfaces.
Also adheres to Metal, Stone, Concrete, Brick, Masonry and various Plastics.
Typicl areas of use include wood jointing and construction, window and door frames, door manufacture, boat building, staircases, ladders and much more.

Limitations

One of the surfaces must be porous
Not suitable for polythylene, polypropylene, tefflon or nylon
Moisture content of wood must not exceed 30% w/w
As product expands slightly on curing, do not use on sheet laminate. Use Contact adhesive.
Only apply between 5 and 30 degrees celcius.
Ensure surfaces are always clamped during cure.

Storage - Store in cool, dry conditions - PROTECT FROM FROST

Shelf Life - 12 Months, less when cartridge has been opened

Application

Surface to be bonded must be clean, dust and grease free. One of the surfaces must be porous. Roughen non-porous surfaces to give a key for the adhesive.
To achive maximum bond strength and assist cure, slightly moisten one surface with a damp cloth. Do not over wet.
Cut the tip of the cartridge taking care not to damage the thread.
Applynozzle and cut cleanly at an angle of 45 degrees. Apply using a standard sealant gun. Wearing gloves is recommended.
Apply adhesive evenly to one surface. If necessary, cover large surfaces with a fine toothed spreader. Assemble parts IMMEDIATELY and clamp for 5-10 mins (at 20 degrees celcius, longer at lower temperatures). After this time the joints may be easily handled. Final and full bond strength will be achieved after 30 minutes.
NOTE: The product foams slightly on application to fill small gaps. Any excess foam/adhesive must be removed with acetone before the product sets, or with a sharp chisel once set.

Coverage - Sufficient for fixing approx 8 No. 1200 x 600mm NO MORE PLY tile backer boards.

Safety First - Always wear gloves