Marmox 310ml Acrylic Sealant

A Waterproof Sealant, ideal for use with Marmox products.

Use to stick boards togather for construction of vanity units, bath steps and to create a waterproof seal around Marmox Showerlays and Showerstones.

Adheres to:
Marmox Boards, Tiles, Brick, Wood & Steel

Before Use:
Wear work clothing and protect all surrounding areas. Make sure area is clean and dry.

How To Use:

• Cut off tip of cartridge above screw thread. Screw nozzle onto cartridge. Cut off end of nozzle at a 45 degreee angle to a width matching the gap to be sealed. 
• Insert into cartridge gun. Squeeze gun trigger and slowly run the nozzle along the area to be waterproofed.
• Smooth the sealant out with a spatuala or similar and remove excess sealant with white spirit.
• Protect from water and damp conditions until the sealant has dried. Drying time at 25 degreec celcius, 60 minutes.

Coverage:
Approximately 11m when using a 6mm bead.