For the restoration of a sheen on polished marble and granite floor surfaces that have become matt or dull. Forms an easy-to-polish protective film and is the ideal additional care product for honed and polished marble and granite floors.
Formulated as a finishing treatment after the application of an impregnating sealant such as Lithofin MN Stain Stop, Lithofin MN Stain Stop ECO, Lithofin KF Stain Stop or any other suitable Lithofin Impregnator.
Not suitable for outdoor use.
Properties:
Lithofin MN Care-Sheen forms an easy-to-polish protective film and enhances the appearance of the surface by slightly intensifying the colour structure.
Field of Use:
For touching up and protecting polished marble and granite surfaces, which have become matt or dull. Lithofin MN Care-Sheen contains cleaning substances and can be used for regular maintenance on surfaces subject to low levels of wear and tear. Also suitable as an initial treatment of rough and honed surfaces where a satin gloss is required. For indoor use only.
Directions for Use:
When using Lithofin MN Care-Sheen as an initial treatment, dilute the product 1:1 with water and apply it to the surface with a clean cloth, sponge or wiper. After approx. 30 to 40 minutes the surface can be polished by hand or machine. For touching up and maintenance use one cup of Lithofin MN Care-Sheen per 10 litres of wiping water. On worn surfaces use a bit more. Do not walk on the surface until the product has dried.
Drying Time:
Approx. 30 to 40 minutes.
Coverage:
Approx. 200 sq./m per litre when used in wiping water, approx. 20 sq./m when used undiluted.
Technical Data:
Density: approx. 1,00 g/cm³
Appearance: liquid, whitish
Odour: pleasant
pH-Value: approx. 9
Solubility in Water: very good
Storage:
Keep closed and cool. Frost-free. Shelf life of up to three years.
Further Maintenance:
Natural stone floors should be wiped regularly. Especially on polished marble, we recommend using Lithofin MN Easy Care Cleaner three to four times, then using Lithofin MN Care-Sheen once.
Environmental Protection:
The contained surfactants are biologically degradable according to EU-regulations. Does not contain any phosphates.
Disposal:
Diluted product may be added to waste water. Containers are made of environmentally friendly polyetylene (PE). Clean containers can be recycled through collection system.
Contents:
Non-ionic surfactants; waxes; auxiliary agents.
General Information:
Keep out of reach of children. No health concerns once dry.
First Aid Procedures:
Remove contaminated soaked clothing immediately. No special measure necessary. In case of contact with skin wash off immediately with soap and water. In case of contact with eyes rinse thoroughly with plenty of water and seek medical advice. In case of ingestion, do not induce vomiting. If swallowed by mistake drink plenty of water and seek medical treatment.
Emergency Procedures:
In case of spill or other release, take up with absorbent material (e.g. sand, sawdust, general-purpose binder). In case of fire formation of dangerous gases possible. Product does not burn, fire-extinguishing activities according to surrounding. Additional Information is listed on the Material Safety Data Sheet. ADR2003: not a dangerous good.
Login /
Basket
