Lithofin KF Cement Residue Remover Ceramic & Vitrified Tiles - 1 Ltr
Especially for indoor use on ceramic surfaces such as fully vitrified tiles, quarry tiles, and clay pavers etc. Effortlessly removes cement and mortar residues, rust, lime, efflorescence and other hardened dirt layers. Concentrate, acid based, rapid acting and easy to use.
Lithofin KF Cement Residue Remover is a concentrate which contains a mixture of special acids together with auxiliary materials. It is highly effective and can be rinsed away with water without leaving any residues. It has a particularly mild odour and does not generate any vapour.
Lithofin KF Cement Residue Remover dissolves inorganic contamination such as cement films, light mortar residues, many kinds of efflorescence as well as rust and lime deposits so that they can be wiped up with the cleaning liquid or rinsed away.
Field of application and suitable surfaces:
The mild odour of Lithofin KF Cement Residue Remover makes it particularly suitable for indoor use and on all ceramic surfaces that have to be cleaned after the grouting operation has been carried out. Such treatment brings out the natural structure of the surface once again. Lithofin KF Cement Residue Remover is suitable for use on ceramic wall and floor tiles, Victorian tiles, clinker slabs, porcelain tiles and floor materials made of brick, clay and terracotta.
Lithofin KF Cement Residue Remover is not suitable for sensitive materials such as enamel, zinc, anodised surfaces, polished marble, certain decorative tiles, amongst others. Protect adjacent areas. Wash away splashes immediately. In cases of doubt, test the product first in an inconspicuous area.
Directions for use:
Depending on the degree of contamination by cement films, Lithofin KF Cement Residue Remover is diluted up to 1:15, applied to the pre-wetted surface and spread out with a scrubbing brush. After a few minutes, brush once more, remove with a vacuum device or cleaning rag and wash away with copious volumes of water. Obstinate areas may be given a repeat application or treated with undiluted product.
About 10-12m2/L depending on the degree of contamination.
Keep cool with the container firmly closed. The product may be kept for several years.
Irritates the eyes and skin. Wash immediately if the cleaner comes into contact with the skin. Keep out of reach of children. Labelling requirements in accordance with Dangerous Material regulations or EC Guideline 88/379: Irritant. ADR/RID: Class 8. No.31c (Not applicable to cartons containing 1 litre bottles).
As required by EEC recommendations: Acids, less then 5% non-ionic wetting agents, auxiliary agents.
• Density: 1.08g/cm3
• pH-value: <1 (concentrated)
• Appearance: clear, orange-red
• Odour: fruity-acidic
1L bottle with childproof cap (10 per carton) 5L canister (2 per carton)
The acid components are substantially neutralised during the cleaning operation. As required by EC regulations, the wetting agents are biodegradable. Phosphate free.
May be added to waste water after dilution. The container is made from environmentally compatible polyethylene (PE) and can be recycled. After being rinsed out, containers may be disposed of through the useful material collection system.
This information is provided without guarantee. The product should be used taking into account the local conditions and the surface to be treated. In all cases of doubt, test the product first in an inconspicuous area.
- Limescale & Hard Water Deposits
- Cement Deposits & Grout Films
- Restoring Old Quarry Tiles
No posts found
Browse By Brand
- Dry Heat
- Gorilla Tubs
- Hardie Backer Boards
- Heatmiser Floor Heating
- Instarmac Ultra Tile
- KGS Group
- Larsen Flexible Adhesives
- No More Ply
- Packexe Film
- Rubi Tools
- Stone Glue from Jolly
- Tile Care
- XPS Insulation Board