Tiling Tools

Mira Mixing Bucket - 25 Litre

Tough multi-purpose bucket ideal for mixing just about anything.

Rust resistant stainless steel base - 115 x 280mm

Solid aluminium shank with ‘soft touch’ handle for extra comfort

Rust resistant stainless steel base - 115 x 280mm

Solid aluminium shank with ‘soft touch’ handle for extra comfort`

Rust resistant stainless steel base - 115 x 280mm

Solid aluminium shank with ‘soft touch’ handle for extra comfort

Direct drive produces a constant cutting speed for ultra smooth cuts.

Powerful 560Watt induction motor

Superb offer for the versatile Vitrex wash kit. Professional and easy way to wash grouted tiles. Large 11 litre container with integral roller for wringing out. Also use to remove adhesive quickly and easily from tops of tiles during fitting.

Ideal for all types of tiles, floors and walls.

Constantly monitors heatmat status during installation

Pack Content

Multi Meter
Tape Measure
Cutting Blade

Paddle Whisk Mixing Tool

Chrome plated mixers used for mixing paint, plaster, cement slurries & textured coatings. Hex shank. Use with electric drills with a 12mm or larger chuck.

Rigid nylon shell with removable inner padding and central ‘hinge’ allowing pads to flex

Durable waterproof lightweight foam pads

Adjustable elasticated strap with hook and loop fastening

Jolly is a mastic made on combined synthetic resins basis. It is mainly used for gluing and filling all types of marbles and natural stones. Jolly has a tenacious setting. After the consolidation it becomes very hard and perfectly polishable.

The light-weight FLEX polishing machine with accelerator trigger switch for sanding and polishing

Slim stick handles; high torque motor, lightweight, and a practical bail handle. That is how to polish easily and effortlessly in every job. The accelerator trigger switch and speed selection allow for a controlled acceleration to the optimal mixing speed.

The Variable 1200 Watt FLEX for the medium speed range.

Great staying power, low gear ratio, plus speed selection with adjustment wheel for controlled acceleration to the required speed. This gives you a sensitive polisher on one hand and a powerful grinder in the mid-speed range on the other hand. With special slender ergonomic rear handle for extremely flat approach angles.

Provides smooth even grouting Stiff density, molded rubber With coiled handle

Max RPM ? 13200

For use with Flex L 3406 VRG Angle Grinder or similar grinder

Grout Rake Tungsten Carbide Tip 130mm

Single blade rakes out old, stained grout before regrouting.New improved design with comfortable handle

Colourless sponge for washing grouted floors and walls down for a better finish

Each hand pad contains thousands of diamond crystals, in a unique dot pattern to ensure fast cutting and consistent material removal. Easy to use, these foam backed pads sit comfortably in your hand and will follow contours and shapes with ease. Ideal for hard to cut materials, such as glass, carbide, and stone. A wide range of mesh sizes from coarse to super-fine are available for any type of finish required.

Each hand pad contains thousands of diamond crystals, in a unique dot pattern to ensure fast cutting and consistent material removal. Easy to use, these foam backed pads sit comfortably in your hand and will follow contours and shapes with ease. Ideal for hard to cut materials, such as glass, carbide, and stone. A wide range of mesh sizes from coarse to super-fine are available for any type of finish required.

13000 rpm ? 80m  / sec

Item No. ? 11340.0

Hard pad for medium grinding with Velcro backed abrasives on angle grinders. For use on Black & Decker, Bosch, Casals, Felisatti, Hitachi, Kress, Makita, Metabo, Per les and other grinders with M14 x 2 Thread.

Max Speed 13000 rpm ? 80m / sec

Item No. ? 11342.0

Hard pad for medium grinding with Velcro backed abrasives on angle grinders. For use on Black & Decker, Bosch, Casals, Felisatti, Hitachi, Kress, Makita, Metabo, Per les and other grinders with M14 x 2 Thread.

Max Speed 8600 rpm ? 50m  / sec

Item No. ? 10324.0

Medium density pad for use with hook and loop (Velcro) abrasive disks. This pad has a M14 x 2 thread and is suitable for use with most electric sanders / polishers

Max Speed Max RPM ? 13200

For use with Flex L 3406 VRG Angle Grinder or similar grinder

Max RPM ? 12000

For use with Flex L 3406 VRG Angle Grinder or similar grinder

Max Speed ? 12300 rpm ? 80m / s

For use with Flex L 3406 VRG Angle Grinder or the Flex L 3403 VRG Polisher or similar grinder / polisher

A unique diamond pattern on the blade allows easy cutting of marble, limestone, travertine & granite.

Max Speed ? 12300 rpm ? 80m / s

For use with Flex L 3406 VRG Angle Grinder or the Flex L 3403 VRG Polisher or similar grinder / polisher

A unique diamond pattern on the blade allows easy cutting of marble, limestone, travertine & granite.

For use with "SmartPads" abrasive disk and "Flex" L 3403 VRG Polisher or Similar Hook and loop fastening system allows for quick changes and less downtime.

For use on random orbital or low speed DA sanders with capture systems Strong resin over resin bond construction is resistant to heat and moisture This special sharp and durable aluminium oxide grain cuts fast and lasts long