Sealers

This kit contains a 250ml can of MN Stain Stop, 500ml bottle of MN Power Clean and a 125ml container of MN Cream polish. It is suitable for intial cleaning, sealing and maintenance of small worktops and vanity tops. It is presented in a strong plastic case and has full instructions.

Strongly enhances natural colour and appearance of travertine, terracotta, slate, tumbled marble, marble, limestone, sandstone, granite, other types of natural and artificial stone, terrazzo, quarry tiles etc. Provides a matt finish. For use on wall and floor surfaces. May be used indoors or outdoors. Strongly protects against water, oil, grease and dirt. Allows surface to breath.

Coverage: From 5-10 sq m depending upon surface porosity.

Suitable for INTERNAL & EXTERNAL. A completely natural, matt finish for travertine, limestone, terracotta, quarry tiles, slate, sandstone, marble, concrete, brick and external paving. Delicately enhances colour and texture. Helps protect against staining. Strongly repels water, oil and grease. Allows surface to breath.

Coverage: From 5 - 10 sq m depending upon surface porosity

Stanley Decorating / Sealing / Grouting Sponge

Stonefix MPG Sealer A colourless Impregnating Sealer for Polished Marble, Porcelain & Granite. A completely natural finish for use on floor and wall & floor surfaces. Easy to apply. May be used indoors or outdoors. May be used on worktops. Strongly protects against water, oil, grease and dirt.

Coverage: 10 - 20 square meters / litre depending on surface porosity.

Easy to apply, low maintenance self shine satin finish acrylic sealer. Enhances colour and texture. Protects against staining and stubborn dirt. Easy to maintain. May be used on travertine, limestone, sandstone, slate, unpolished marble, terracotta, quarry, bricks, terazzo and concrete. Suitable for domestic and commercial use.

Coverage: 15-13 sq m per litre (one coat) depending upon substrate porosity.

A spirit based, silicone impregnator that penetrates into the surface of stone and forms an invisible film within the pores and capillaries. Prevents staining from water, dirt and oil, allowing the stone to breathe, and aids maintenance. For use on all polished and unpolished natural and artificial stone.

A solvent based acrylate sealant that produces a high sheen finish, whilst intensifying and protecting the colours and aids maintenance on riven / rough multi-coloured slate.

A spirit based colour intensifier that impregnates deep into stone and helps protect from water based staining and general dirt. For use on textured granite, sawn limestone, slate, yorkstone, sandstone, terrazzo and concrete slabs

A water based emulsion that produces a very hardworking satin finish that stops the penetration of dirt, oil, grease, water and helps avoid etching from acid foodstuffs. For rough and honed finished stone, concrete moulded slabs, terracotta and unglazed ceramics.

LTP Ironwax Primer - For use on floors which are porous by nature before finishing with Stonefix Satin Finish Sealer.

Easy to apply acrylic primer.  Enhances the colour and texture of floors. Suitable for unglazed quarry tiles, terracotta,  slate,  travertine, limestone,  terrazzo  and un-polished marble.

Coverage: Approx 22 sq / m per litre (one coat)

LTP Boiled Linseed Oil - The Traditional Pre-Polish Sealer for Terracotta.

Terracotta is a porous material which if untreated will readily stain.  Traditionally, Boiled Linseed Oil is used to fill the pores of terracotta, thereby reducing porosity and inhibiting absorption of grime and fluids.  This rich golden coloured oil is ideal for enhancing the colour and natural tone of terracotta.

Coverage: 20 sq / m (1 coat)

LTP Wall and Floor Grout Protector - For Porous Grout in Kitchens, Bathrooms etc. Ceramic Tiles Only

Forms a clear, colourless barrier.  Helps protect absorbent, porous grout joints from penetration by water, dirt, oil, grease, limescale and other commonly found household contaminants.  Makes the treated surface easier to keep clean.

Coverage: approx 20 sq / m when used to treat grout only

LTP Clear Beeswax - Clear Floor Polish For Terracotta & Wood

A soft paste, blended from three types of wax - Beeswax, Carnauba Wax (one of the toughest natural waxes known to man) and Paraffin Wax for its blending properties. LTP Clear Beeswax gives treated surfaces an excellent shine and provides a resilient protective layer against water, dust, dirt.

Coverage: 10 sq / m - 1 Litre
Coverage: 25 sq / m - 2.5 Litres

LTP Antique Beeswax - 'Ageing' Floor Polish for deepening the colour of terracotta & wood.

LTP Antique Beeswax is a soft paste, blended from three types of wax - Beeswax, Carnauba Wax (one of the toughest natural waxes known to man - obtained from Palm trees and Paraffin Wax for its blending properties.

Coverage: 10 sq / m - 1 Litre
Coverage: 25 sq / m - 2.5 Litres